-
Explore by Category
Explore by Category
Bull Bars ForRAM 1500 DT 2018-2024
Results filtered by your vehicle
The results below have been filtered by your vehicle
Check Bull Bar Compatibility
Select your 1500 DT variant
This page contains products that don't fit your build
Filtered results for
Choose Your Bull Bar
APEX Bull Bar & Lights Kit
APEX Bull Bar & Lights Kit - Single Loop
Raid-X Bar
Overview & Tech Specs
Overview
The APEX Bull Bar is a modern twist on a classic design.
The 'big bar' design features 60.3mm triple hoops and comes complete with integrated recovery points and a front 4mm bash plate.
The latest in bull bar designs includes a pod for optional cube fog, driving and turn park lights, to finish off the modern look.
Key Features
- ADR compliant and compatible with all vehicle safety features
- Synthetic or steel cable winch ready, up to 12,000lb
- 60.3mm steel triple hoop, headlight, and bonnet protection
- Integrated Recovery Points
- Integrated 4mm front bash plate
- Cube light ready, up to 6 fog, driving or turn/park lights
- Driving light and UHF mounting provisions
Tech Specs
- 3mm Steel construction
- 60.3mm Triple loop bars
- ADR Approved
- E-coated for rust prevention
Overview & Tech Specs
Tech Specs
- Min 3mm steel construction
- 60.3mm hoop diameter
- 2x 5t rated recovery points
- 4mm skid plate
- E-coated for rust prevention
- 12,000lb winch ready
Overview & Tech Specs
Overview
The Raid Bull Bar has got to be one of the best-looking bars on the market (if we don't say so ourselves).
Let's address the elephant in the room, it doesn't have hoops! But that is where the protection difference between the RAID and the traditional triple-hoop bars start and finish.
Built from the same pedigree as its more traditional brothers, the Raid Bull Bar maintains the structural integrity you require to protect your critical engine components, maintains all the same accessory mounting features, AND... looks bloody mint!
Standout Features
- 3mm Fully welded steel construction
- 12,000lb Winch-ready
- 2x 5t Radius edge recovery points
- 4mm Skid plate
- Provisions for cube/fog lights, driving lights, and light bars
Top Tech Specs
- ADR Compliant and compatible with all vehicle safety features
- 3mm Steel construction
- Primed for rust prevention
- Textured powder coat finish
- 3 Year warranty
The Ironman 4x4 Raid Bull Bar is becoming one of the most popular bull bars on the market, and you only need to look at it to understand why!
Tech Specs
- ADR Compliant
- Safety systems compatible
- 3mm Powder coated steel
- E-coated for rust prevention
Upgrade Your Build
Add-On Accessories
Driving Lights
Winches
Suspension Kits
Underbody Protection
Towing & Rear Protection
UHF Radios
FAQs
Are Ironman 4x4 Bull Bars ADR compliant?
Yes, all Ironman 4×4 bull bars to suit the RAM 1500 DT are designed to comply with the ADR.
Will my sensors, radars and safety systems still work?
Yes, unless stated otherwise, Ironman 4×4 design bars to complement all the safety features of your RAM 1500 DT.
Do I need to upgrade my suspension when I install a bull bar on my RAM 1500 DT?
Whether or not you might need to consider a suspension upgrade really comes down to each individual vehicle set-up and what additional accessories are installed. It’s recommended you talk to your local store while you are ordering your bull bar.
What is the warranty period of Ironman 4x4 bull bars?
Bull bars to suit the RAM 1500 carry a 3 year warranty.
Why should I put a bull bar on my RAM 1500 DT?
Ironman 4×4 design these bull bars not just as 4×4 accessories, but as crucial enhancements for your 4WD, boosting its resilience and capability.Our bull bars are rigorously tested and designed for the extremes, ensuring reliability and performance. Proceed with confidence with an Ironman 4×4 bull bar on your RAM.