-
Explore by Category
Explore by Category
Bull Bars ForFORD F-150 2021+
Results filtered by your vehicle
The results below have been filtered by your vehicle
Check Bull Bar Compatibility
Select your F-150 variant
This page contains products that don't fit your build
Filtered results for
Choose Your Bull Bar
APEX Bull Bar & Lights Kit
APEX Single Loop Bull Bar
Overview & Tech Specs
Overview
The APEX Bull Bar is a modern twist on a classic design.
The 'big bar' design features 60.3mm triple hoops and comes complete with integrated recovery points and a front 4mm bash plate.
The latest in bull bar designs includes a pod for optional cube fog, driving and turn park lights, to finish off the modern look.
Key Features
- ADR compliant and compatible with all vehicle safety features
- Synthetic or steel cable winch ready, up to 12,000lb
- 60.3mm steel triple hoop, headlight, and bonnet protection
- Integrated Recovery Points
- Integrated 4mm front bash plate
- Cube light ready, up to 6 fog, driving or turn/park lights
- Driving light and UHF mounting provisions
Tech Specs
- ADR approved
- 3mm steel construction
- 4mm skid plate included
- E-coated for rust prevention
Overview & Tech Specs
Overview
The APEX Bull Bar is a modern twist on a classic design.
The 'big bar' design features 60.3mm triple hoops and comes complete with integrated recovery points and a front 4mm bash plate.
The latest in bull bar designs includes a pod for optional cube fog, driving and turn park lights, to finish off the modern look.
Key Features
- ADR compliant and compatible with all vehicle safety features
- Synthetic or steel cable winch ready, up to 12,000lb
- 60.3mm steel triple hoop, headlight, and bonnet protection
- Integrated Recovery Points
- Integrated 4mm front bash plate
- Cube light ready, up to 6 fog, driving or turn/park lights
- Driving light and UHF mounting provisions
Tech Specs
- ADR compliant and compatible with all vehicle safety features
- Synthetic or steel cable winch ready, up to 12,000lb
- 60.3mm steel triple hoop, headlight, and bonnet protection
- Integrated Recovery Points
- Integrated 4mm front bash plate
- Cube light ready, up to 6 fog, driving or turn/park lights
- Driving light and UHF mounting provisions
Add-On Accessories
Driving Lights
Winches
Suspension
Side Rails & Steps
UHF Radios
Bullbar FAQs for Ford F-150
Are your bull bars for the F-150 in Australia ADR compliant?
Yes, all IRONMAN 4X4 bull bars on F-150 variants are designed to comply with the ADR.
Will my sensors, radars and safety systems still work?
Yes, unless otherwise stated, our F-150-compatible bull bars are built to keep your safety systems operational.
Do I need to upgrade my suspension when I install a bull bar on my Ford F-150?
Whether or not you might need to consider a suspension upgrade really comes down to each individual vehicle setup and which additional accessories are installed. It’s recommended that you talk to your local store when you are ordering your bull bar.
What is the warranty period of IRONMAN 4X4 bull bars?
Ourbullbarsfor theFord F-150 carry a 3-year warranty.
How do I install a bullbar on a Ford F-150?
We recommend getting your bull bar for your F-150 installed professionally by your local IRONMAN 4X4 store to ensure your vehicle's safety and a valid warranty on your bull bar.
It is possible to install a bull bar yourself. However, this will require some specialist mechanical tools and understanding.
About our bullbars for the Ford F-150
The F-150 is built to work hard and go further. Make sure the front end is protected to match. Whether you're fitting a bull bar on an F-150 for remote station runs, serious off-road touring, or the daily demands of a working truck, IRONMAN 4X4 delivers Australian-engineered protection built for even the toughest conditions.
Serious protection for a serious truck
Engineered to ADR specs and precision-manufactured to suit your rig, our bull bars for the Ford F-150 ditch the factory front end for a robot-welded steel construction that delivers complete frontal protection for your bonnet, headlights, and everything behind them. The optimised design works with the F-150's high-clearance stance to sharpen your approach angles and keep you moving through country that would stop a stock truck in its tracks.
Running an F-150 with a bull bar from IRONMAN 4X4 means you're not sacrificing payload or towing capacity to get there. Our bars are light enough to maintain a functional GVM, yet rated to handle a 12,000-lb winch when a recovery is on the cards. Every kit is fully compatible with Ford's safety systems, such as AEB, Blind Spot Monitoring, parking sensors and cameras, so you don’t need to compromise on factory features.
Built for every F-150 owner
Whether you're running fleet vehicles across a mine site or pushing deep into the outback on a long-range touring build, there’s a bull bar kit for your F-150 in the IRONMAN 4X4 range that fits the bill. Choose from lighting packages to light up the track ahead, triple-hoop designs engineered for maximum impact protection, or a single-loop profile that suits the F-150's American truck styling without overcomplicating the front end.
Made for Australian Conditions
Every bull bar kit for the Ford F-150 is winch-ready with chassis-mounted steel cradles rated to 12,000lb and includes two integrated 5-tonne recovery points that match the demands of any recovery. If you’re serious about getting the most out of your F-150 bull bar in Australia, pair it with a suspension kit for a smoother ride, side steps to help passengers in and out, and underbody protection plates to protect vital engine components. Ready to own the best Ford F-150 bull bar in Australia? Find your local IRONMAN 4X4 dealer today for a tidy, professional installation.
