-
Explore by Category
Explore by Category
Bull Bars For FORD RANGER RAPTOR PXIII
Results filtered by your vehicle
The results below have been filtered by your vehicle
Check Bull Bar Compatibility
Select your Ranger Raptor PXIII variant
This page contains products that don't fit your build
Filtered results for
Choose Your Bull Bar
APEX Bull Bar & Lights Kit
Overview & Tech Specs
Overview
The APEX Bull Bar is a modern twist on a classic design.
The 'big bar' design features 60.3mm triple hoops and comes complete with integrated recovery points and a front 4mm bash plate.
The latest in bull bar designs includes a pod for optional cube fog, driving and turn park lights, to finish off the modern look.
Key Features
- ADR compliant and compatible with all vehicle safety features
- Synthetic or steel cable winch ready, up to 12,000lb
- 60.3mm steel triple hoop, headlight, and bonnet protection
- Integrated Recovery Points
- Integrated 4mm front bash plate
- Cube light ready, up to 6 fog, driving or turn/park lights
- Driving light and UHF mounting provisions
Tech Specs
- 3mm Steel construction
- 4mm Skid Plate
- 60.3mm Triple loop bars
- DRL & indicators sold separately
- E-coated for rust prevention
Add-On Accessories
Driving Lights
Winches
Suspension
Towing & Rear Protection
UHF Radios
The Right Bull Bar for Your PX3 Ranger Starts Here
A bull bar for the Ford Ranger PX3 is the cornerstone of any serious build: your winch mount, your recovery anchor, your auxiliary light platform, and your front-line protection against wildlife strikes and trail hazards.
IRONMAN 4X4 offers the APEX Bull Bar for the PXIII Ranger. It's is ADR-compliant, winch-ready to 12,000lb, and fully compatible with the PXIII’s airbag deployment, sensors, and safety systems. It carrys a 3-year warranty and is supported by a national network of authorised dealers and fitting centres.
FAQs
Are IRONMAN 4X4 bull bars for the Ford Ranger PXIII ADR compliant?
Yes. All IRONMAN 4X4 bull bars for the Ford Ranger PX3 are designed to comply with Australian Design Rules (ADR) and are compatible with the PXIII Ranger’s airbag deployment, forward sensors, and radar systems.
Unless otherwise stated, all vehicle safety features continue to function correctly after installation.
Will my sensors, radars and safety systems still work?
Yes, unless stated otherwise, IRONMAN 4X4 design bars to complement all the safety features of your Raptor PX3.
Do I need a suspension upgrade when fitting a bull bar to my PX3 Ranger?
It depends on your overall build. A bullbar for the Ranger PX3 adds meaningful front-end weight, and if you’re also running a winch and driving lights, the load on your front suspension is significant.
IRONMAN 4X4 offers a full range of coil springs with multiple spring rates to suit your needs. Speak to your nearest IRONMAN 4X4 dealer for personalised recommendations.
What is the warranty period of IRONMAN 4X4 bull bars?
Bull bars to suit the Ford Raptor PX3 carry a 3 year warranty.
Bull Bars for the Ford Ranger Raptor PX3 made for the tough tracks
The APEX Bull Bar is offers maximum protection with big 60.3mm hoops, making it one of the most popular bullbars for the PX3 Raptor on the market. The full lights kit includes four cube lights (2 x white flood LEDs and 2 x turn/park combo LEDs) with all wiring looms - everything you need in one package. Winch-ready with 2 x 5-tonne radius-edge recovery points and a 4mm skid plate, it delivers genuine capability with a clean, modern aesthetic.
Complete Your Setup at IRONMAN 4X4
A bull bar for the PXIII Ranger Raptor is just the start. Pair it with a upgraded coil springs to properly support the added front-end weight while maintaining ride height and handling. In the tub, canopies and ute roller shutters complete the build from front to back. For remote touring, add a snorkel and battery tray for dual-battery capabilities.
Visit your local IRONMAN 4X4 centre or authorised dealer for a comprehensive build assessment and to book your installation.