Reference No. FM-PD-05
Release Date: 6th June 2024
Part Number: IDL0701S / IDL0701C / IDL0901S / IDL0901C
Product Name: SCOPE Driving Lights- 7" & 9" Models
Suitable For: All Vehicles
This bulletin advises that all fixings supplied for mounting the SCOPE 7” & 9” lights should be used to ensure the safety and reliability of driving light installations.
If the lights are not mounted using the three sets of fixings supplied to ensure a stable and solid fitment, excessive vibration could potentially damage the fixing point or the lights.
It is also essential to confirm the manufacturer's maximum weight rating when installing with OEM or non-genuine products to ensure that the lights do not exceed the manufacturer's specifications.
Components & Assembly
- SCOPE 7” are supplied with a 1 x M10 bolt, a flat & spring washer & nyloc nut + 2 x M6 bolt, flat & spring washers & nylon nuts.
- SCOPE 9” are supplied with a 1 x M10 bolt, a flat & spring washer & nyloc nut + 2 x M8 bolt, flat & spring washers & nylon nuts.
(Images here)
- M10 bolts and fixings are utilised in the centre hole of the mounting bracket; the M6 or M8 fixings are installed in the slots on either side of the centre bolt, allowing the setting of the light direction.
- For the correct installation, each bolt must be located through the lights mounting bracket and the fixing surface, with the Flat washer, spring washer, and finally, the Nyloc Nut attached on the underside.
NOTE: SCOPE 5” Lights are supplied with a single 1 x M10 bolt, a flat & spring washer & nyloc nut and do not require additional fixing due to their weight & size.